Make Your Own Earphone Holder

(718 Views)


Make Your Own Earphone Holder

Headsets, or commonly known earphones have become an essential accessory for almost everyone. Initially it used to be owned by youths alone. Now significant to even the old.

Whenever these structures would be handled nakedly, you'll have them destroyed. The wires would be loosened and eventually torn. For this reason, we now think of creating earphones holder to safeguard earphones from wear and tear. Consider the following procedure:

Step 1: Material Required

  1. Hot Glue Gun
  2. Plastic Gears
  3. Stationary Knife

Parts to be ordered from the Local Store: Bottle caps, metal-shaft slightly longer than length of the two caps, and wired earphones.

N/B: The metal shaft should be extracted from a toy DC motor.

Step 2: Have the Bottle Caps ready and Prepared


Make Your Own Earphone Holder

Make Your Own Earphone Holder

Make Your Own Earphone Holder

Make Your Own Earphone Holder

Make Your Own Earphone Holder
  1. Have 2 identical plastic bottle caps.
  2. By the help of a mini-PCB drill, drill holes at the centre of the 2 caps.
  3. Make metal shaft insertion via the holes and keep the shaft locked from one side by inserting the plastic gear.
  4. With the aid of a stationary knife, create minor cuts at the opposite edges of the 2 bottle caps to fix the wires.

Step 3: Position the Headsets


Make Your Own Earphone Holder

Make Your Own Earphone Holder

Make Your Own Earphone Holder

Make Your Own Earphone Holder

Make Your Own Earphone Holder
  1. Look for the wired headsets you normally use.
  2. Take the measurements of the centre point of the headset wires. Create a wire loop at the loci of the point.
  3. Make metal shaft insertion alongside the bottle cap via the wire loop.
  4. Protect the headset wires on the shaft by means of hot glue.
  5. Fit the wires to the depressions created in the bottle caps.
  6. Seal the bottle caps together using hot glue.
  7. Insert a different plastic gear at the other end to keep the metal shaft locked.
  8. At this juncture you'll now have headsets creating a cylindrical-box hang at middle.

Step 4: Ascertain the working of the Holder


Make Your Own Earphone Holder

Make Your Own Earphone Holder

The earphones holder are now ready. You can now begin using them to safeguard your headsets. Anyone using the holder will have their earphones lasting 3 times more than the one usual way of storage.

Solution Worked 4 UpvotesUpvote

        

Solution Didn't Worked 0 DownvotesDownvote



Comments



Search

Play 2048 Game Online

Search Tags

    How to make your own Earphone Holder